header

Tests For Rice Pullers

TESTS FOR RICE PULLER



  1. SIZE.......................................................................
  2. WEIGHT.......................................................................
  3. SHAPE.......................................................................
  4. STAPLER PIN TOUCHING:  Take a small iron stapler pin and bring near the RP. It should not stick to RP. (If the pin sticks, then RP is fake.)
  5. INSTANT PULLING DISTANCE:  Get fresh rice from home preferably fresh dehusked rice. (Do not use sellers rice as they do gimmicks as they use chemicals kept hidden in fingernails.)Keep the rice very near the item for attraction note the time taken and distance pulled and color.
  6. INSTANT PULLING TIME...............................................................................
  7. Color change time after sticking...................................................................
  8. After how much time does the rice fall.............................................................
  9. RICE TO RICE:   Take these tested rice & place them on a flat surface towards untested rice and check for attraction.
  10. GLASS WATER TEST:   Fill a non-metallic glass with water and place the 4 tested rice on the water surface (as in 4 corners). After some time they will come towards the center. The rice should turn to yellow or brown in color.Now bring a Pin over the center; the rice will move away.Remove the pin and they will come to the center again. (If rice turns to BLUE COLOR then RP is afake.)
  11. WATER TO RICE: Fill 1” water in a non-metallic glass; put plain rice in it; they will settle at the bottom.Now sprinkle some tested “rice dust“ on the water.The plain rice will stand vertically at the bottom of the glass.
  12. COPPER WIRE TEST:   Take a thin copper wire and wind 2 or 3 turns on the RP and leave about 2 inches hanging out. Now do the INSTANT PULLING TEST. The copper wire should pull rice same as with the RP itself.